Pleated Blinds Measuring Instructions (1 and 2 SCOW)

The long and trouble-free operation of the window cover depends not only on the high quality of its manufacture, but also on its proper fitting and assembly. For the aperture to fit perfectly, the chosen location must be correctly and carefully dimensioned.
The following auxiliary drawings must be strictly adhered to.

Installation Inside the Window Recess
Installation Inside the Window Recess
  • A - WINDOW RECESS WIDTH If the width of the recess is not the same at all points, use the smallest measurement. 5 mm is the distance that must be subtracted from the recess width to allow the pleated blind to be installed freely.
  • B - WINDOW RECESS HEIGHT If the height of the recess is not the same at all points, use the smallest measurement. 5 mm is the distance that must be subtracted from the recess height to allow the pleated blind to be installed freely.

Installation inside the window recess applies to the following types of pleated blinds: 1SCOW, 2SCOW.

Wall / Ceiling Mounting
Wall Mounting
  • A - PLEATED BLIND WIDTH
  • B - PLEATED BLIND HEIGHT
  • C - WINDOW RECESS WIDTH
  • D - WINDOW RECESS HEIGHT

Use this option if you want to install the pleated blinds on the wall. We suggest that the pleated blind be about 8-10 cm wider and 8-10 cm higher than the window recess to avoid gaps.

Wall / Ceiling mounting applies to the following types of pleated blinds: 1SCOW, 2SCOW.

Non-Invasive Mounting on the Window Sash
Non-Invasive Mounting on the Window Sash
  • A - WIDTH This is the width of the glass including the glazing beads.
  • B - HEIGHT This is the height of the window sash.
  • I - Window Frame
  • II - Glazing Bead
  • III - Glass

*When measuring, ensure that the pleated blind does not interfere with the window handle.

Non-invasive mounting on the window sash applies to the following types of pleated blinds: 2SCK, 1SCOW, 2SCOW.

*All dimensions are given in millimetres.