The proper way to get dimensions

Measuring instructions Roller blind MICRO S

The long-lasting and trouble-free operation of a window blind depends not only on the high quality of its craftsmanship, but also on accurate measuring and correct installation. For the blind to fit perfectly, the chosen location must be properly and carefully measured.
The following auxilary drawings must be strictly adhered to.

Screwed - window recess

MICRO S roller shutters are suitable for windows with classic and half-round glazing beads. They can be installed in windows with a flat transition between the glazing beads and the window frame (See the drawing below).

• A - WIDTH This is the width of the glass together with glazing beads. (We take the measurement in the places where the glazing bead joins the window frame).
• B - HEIGHT This is the height of the glass pane and the upper sash of the window, together with the glazing beads. (We take the measurement in the places where the glazing bead joins the window frame). *in the 100% blackout version, the cassette holds up to 180 cm of fabric.
• Z - DISTANCE OF THE WINDOW HANDLE TO THE GLAZING BEAD (minimum 1cm) This is the distance between the window handle and the end of the glazing bead needed to make the guides. (The measurement is taken from the end of the handle towards the glass to the end of the glazing bead).
• I - Window frame
• II - Glazing bead
• III - Glass

*Roller blinds with a height exceeding 2000mm (200cm) may not fully hide in the cassette.
**All dimensions are given in millimeters